Model | N/A |
Shutter | N/A |
Aperture | N/A |
ISO Speed | N/A |
Focal Length | N/A |
Captured | N/A |
Categories: Tech, Equipment, Safety, Big Fast Trikes
At the blue arrow, I attached a zip tie to an oval piece of rubber I cut. The rubber is basically a washer I cut to place under the bolt and washer of the LED strobe itself. I cut the rubber slightly oval so that I'd have a tab which I could put a hole through and zip tie to. The grey wire then exits toward the right out into the strobe near the second of the two strobe light mounting nuts. I put rubber under each nut/washer.