I mounted the strobes slightly rearward of the fattest portion of the wheelpant. I didn't want the...rthest (in harm's way).
In this position, the wheelpant angles slightly to the rear- so the light in this position has a slight rearward angle-- which to me...
In this photo, the wheelpant is upside do...e are looking in to where the wheel would be. The rear of the wheelpant is toward the top. The outer side of the wheelpant is on the right (where the light is mounted), and the tr...self. I cut the rubber slightly oval so that I'd have a ta...
Routing the wire from the wheelpant to the wheel strut.
The two blue arrows show:
where a tension loop is placed and an electrical connector to allow disconnection in case the wheelpant needs to be completely removed
where the strobe is on the outer aspect of the pant
At the blue arrow, I attached a zip tie to an oval piece of rubber I cut....and washer of the LED strobe itself. I cut the rubber slight...right out into the strobe near the second of the two strobe ligh...
This photo was taken one beautiful evening at California Valley at twilight.
With one additional wire, the lights can be synced (right and left) so they fire at the same time.
I used a dipole switch for my strobes (off, position, strobe) $27 from B & C Specialty Products.