This photo was taken one beautiful evening at California Valley at twilight.
With one additional wire, the lights can be synced (right and left) so they fire at the same time.
I used a dipole switch for my strobes (off, position, strobe) $27 from B & C Specialty Products.
At the blue arrow, I attached a zip tie to an oval piece of rubber I cut. The rubb...I cut to place under the bolt and washer of the LED strobe itself. I cut the rubbe...grey wire then exits toward the right out into the strobe...
Hi all, I'm finally adding my Aveo Powerburst Plus 3 in 1 Strobe, Nav and marker lights on my Tanarg. I'm adding them high up on the wheel fairing; the same place the Revo uses. This location seems best to be...
In this photo, the wheel pant is upside down, and we are looking in to where the wheel w...I cut to place under the bolt and washer of the LED strobe itself. I cut the rubbe...grey wire then exits toward the right out into the strobe...
Mayby one wing, maybe another. So many decisions. Gotta connect the rear strobe light and paint the header pipe. The saddle bags will go on and the Ballistic Chute re-installed. This trikes looks and sits like a two place but it is a single.
Routing the wire from the wheel pant to the wheel strut.
The two blue arrows show:
where a tension loop is placed and an electrical connector to allow disconnection in case the wheel pant needs to be completely removed
where the strobe is on the outer aspect of the pant