...feet over the runway, cut power to idle, and ease the bar out and bleed off some airspeed before touching down. But if it is gusty, I don't bleed off as much and I let the nos...
...rible i would have a higher shorter glide scope and pull the bar in and bleed off the speed.so i supose a h...throttle be quick and attentive on the roll athority. If it feels good bleed off speed stay aligend to the...
Hi Crayonbox, Keep pumping the brakes, they WILL come up. You may have to bleed them a little more. I have seen this before, and I have had it happen to mine. Just be persistent, and pump, pump, pump!
...p; Once they start bouncing, they are on the verge of flipping over on the runway. The best way to prevent bounces it to let the speed bleed off, a few inches above the g...
...needed to be exactly the same. I used a 10 or 12mm long allen wrench to set them and then left a few mm of slack in the cables. Then I set the air bleed for maximum rpm and the thumb...
...ing those really helped on those strong crosswind landings. In the strong cross wind, come with lots of extra speed, but make sure you bleed it off before setting down....
Good job Tom.
No messing around with an 180 or S-turns to bleed off some altitude. Got it down, on the ground. If your brakes were not as good as they were, you co...
...trike gurus', who insist that you MUST always push out till you'r teeth bleed! or it's a 'failed landing'. ps. a failed landing has you upside-down in a ditch bleeding from your arse-hole wonder...
...d days.
so far i havent had a problem skipping on a wheel landing my red back i just try to get a good arc in my glidescope.maintain and bleed my airspeed . feel for settin...